Latest Juniper - Exam Dumps JN0-335 Zip

We guarantee you that our top-rated Juniper JN0-335 practice exam will enable you to pass the Juniper JN0-335 certification exam on the very first go. The authority of Security, Specialist (JNCIS-SEC) JN0-335 Exam Questions rests on its being high-quality and prepared according to the latest pattern.

Juniper JN0-335 exam is designed for IT professionals who want to demonstrate their expertise in Juniper Networks security products and solutions. Security, Specialist (JNCIS-SEC) certification exam is part of the Juniper Networks Certification Program and is aimed at those who have a good understanding of networking technologies and experience with Juniper Networks security products. Passing JN0-335 exam will validate the candidate's skillset in implementing and troubleshooting Juniper Networks security products and solutions.

Earning the JN0-335 Certification demonstrates that an individual has the skills and knowledge required to design, implement, and manage Juniper Networks security technologies. It validates that the individual has a deep understanding of Junos security features and can apply them in real-world scenarios. Security, Specialist (JNCIS-SEC) certification is highly valued by employers as it demonstrates that the individual has the skills and knowledge required to secure their network infrastructure.

>> Exam Dumps JN0-335 Zip <<

JN0-335 Key Concepts & New JN0-335 Dumps Files

In some companies, the certificate of the exam isdirectly linked with the wages and the position in your company. Our JN0-335 exam cram will offer you the short way to get the certificate. With the most eminent professionals in the field to compile and examine the JN0-335 Test Dumps, they have a high quality. Purchasing the JN0-335 exam cram of us guarantees the pass rate, and if you can’t pass, money back is guaranteed.

Juniper JN0-335 (Security, Specialist (JNCIS-SEC)) certification exam is designed for professionals who want to validate their knowledge and skills in the field of network security. JN0-335 exam is intended for individuals who have a strong understanding of Juniper Networks Junos OS software for SRX Series devices and are familiar with security technologies and related platform configuration and troubleshooting skills.

Juniper Security, Specialist (JNCIS-SEC) Sample Questions (Q186-Q191):

NEW QUESTION # 186
What are two elements of a custom IDP/IPS attack object? (Choose two.)

A. the destination zone
B. the severity of the attack
C. the exempt rulebase
D. the attack signature

Answer: B,D

NEW QUESTION # 187
When referencing a SSL proxy profile in a security policy, which two statements are correct? (Choose two.)

A. If you apply an SSL proxy profile to a security policy and forget to apply any Layer7 services to the security policy, any encrypted traffic that matches the security policy is not decrypted.
B. A security policy can only reference a client-protection SSL proxy profile or a server-protection SSL proxy profile.
C. A security policy can reference both a client-protection SSL proxy profile and a server-protection proxy profile.
D. If you apply an SSL proxy profile to a security policy and forget to apply any Layer7 services to the security policy, any encrypted traffic that matches the security policy is decrypted.

Answer: A,B

NEW QUESTION # 188
Which three statements about SRX Series device chassis clusters are true? (Choose three.)

A. A control link failure causes the secondary cluster node to be disabled.
B. Chassis cluster control links must be configured using RFC 1918 IP addresses.
C. Recovery from a control link failure requires that the secondary member device be rebooted.
D. Chassis cluster member devices synchronize configuration using the control link.
E. Heartbeat messages verify that the chassis cluster control link is working.

Answer: A,D,E

Explanation:
Explanation
B: Chassis cluster member devices synchronize configuration using the control link. The control link is used to exchange control messages and configuration information between the two nodes of a chassis cluster1. The primary node pushes the configuration to the secondary node and ensures that both nodes have the same configuration2.
C: A control link failure causes the secondary cluster node to be disabled. If the control link fails, the primary node cannot communicate with the secondary node and assumes that the secondary node is down1. The primary node then disables the secondary node and takes over all the traffic processing2.
E: Heartbeat messages verify that the chassis cluster control link is working. The control link also carries heartbeat messages that are exchanged between the two nodes every 500 milliseconds by default1. The heartbeat messages indicate the status and health of the nodes and the control link2.
A: Chassis cluster control links must be configured using RFC 1918 IP addresses. This is a false statement. The control link can use any IP address range as long as it is not in conflict with other interfaces or routes on the cluster nodes1. RFC 1918 IP addresses are private addresses that are not routable on the Internet4.
D: Recovery from a control link failure requires that the secondary member device be rebooted. This is also a false statement. Recovery from a control link failure does not require rebooting the secondary node1. The secondary node can rejoin the cluster when the control link is restored and the configuration is synchronized2.
References:
1: Configuring Chassis Clustering on SRX Series Devices
2: Chassis Cluster User Guide for SRX Series Devices
3: Connecting SRX Series Firewalls to Create a Chassis Cluster
4: RFC 1918 - Address Allocation for Private Internets
https://supportportal.juniper.net/s/article/SRX-Secondary-node-of-a-Chassis-Cluster-is-in-Disabled-state-how-do

NEW QUESTION # 189
You are asked to block malicious applications regardless of the port number being used.
In this scenario, which two application security features should be used? (Choose two.)

A. APPID
B. AppFW
C. AppQoE
D. AppTrack

Answer: A,B

Explanation:
you can block applications and users based on network access policies, users and their job roles, time, and application signatures2. You can also use Juniper Advanced Threat Prevention (ATP) to find and block commodity and zero-day cyberthreats within files, IP traffic, and DNS requests1

NEW QUESTION # 190
You want to permit access to an application but block application sub-Which two security policy features provide this capability? (Choose two.)

A. APPID
B. micro application detection
C. content filtering
D. URL filtering

Answer: B,D

Explanation:
The two security policy features that provide the capability to permit access to an application but block its sub-applications are URL filtering and micro application detection. URL filtering allows you to create policies that permit or block access to certain websites or webpages based on URL patterns. Micro application detection is a more sophisticated approach that can identify and block specific applications, even if they are embedded within other applications or websites. According to the Juniper Networks Certified Internet Specialist (JNCIS-SEC) Study Guide [1], "micro application detection is the most accurate way to detect and control applications." Content filtering and APPID are more general approaches and are not as effective in providing the level of granularity needed to block sub-applications.

NEW QUESTION # 191
......

JN0-335 Key Concepts: https://www.real4exams.com/JN0-335_braindumps.html